Filter Life - For best results, filters should be replaced approximately every 6-14 months depending on water conditions.
The filter life indicator give you an indication of how much water has flowed through the system. When the reading is 9999, it will blink and also give you a voice message indicating its time to change the filter.
Filter life can be shortened by:
- Water that has lots of rust
- Water that has lots of visible substances in it - ie: muddy water
- Using the machine with low water pressure
The only way to know for sure if the carbon filter is used up is if you taste chlorine in the water after it has gone through the water ionizer or to test for it with a chlorine test kit such as those used to measure pool chlorine levels.
Filter Replacement Instructions
- Important - Do not unplug the machine
- Open the filter cover at the back of the machine
- Push down and turn old filter to remove - not there will be some water leaking
- Install the new filter
- Turn on the water value and allow water to flow for at least 2-3 minutes. You may notice some activated carbon powder escape in water immediatly after filer change.
- Press the reset button - indicator will return to 0000
- Replace filter cover